Old kernels that used high memory only allowed the initrd to be in the
first 896MB of memory.  If you load the initrd above, they complain
that "initrd extends beyond end of memory".

In order to fix this, while not breaking machines with small amounts
of memory fixed by cdebec5e

 (linuxboot: compute initrd loading address,
2014-10-06), we need to distinguish two cases.  If pc.c placed the
initrd at end of memory, use the new algorithm based on the e801
memory map.  If instead pc.c placed the initrd at the maximum address
specified by the bzImage, leave it there.

The only interesting part is that the low-memory info block is now
loaded very early, in real mode, and thus the 32-bit address has
to be converted into a real mode segment.  The initrd address is
also patched in the info block before entering real mode, it is
simpler that way.

This fixes booting the RHEL4.8 32-bit installation image with 1GB
of RAM.

Cc: qemu-stable@nongnu.org
Cc: mst@redhat.com
Cc: jsnow@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 269e2358

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

Even though hw/i386/pc.c tries to compute a valid loading address for the
initrd, close to the top of RAM, this does not take into account other
data that is malloced into that memory by SeaBIOS.

Luckily we can easily look at the memory map to find out how much memory is
used up there.  This patch places the initrd in the first four gigabytes,
below the first hole (as returned by INT 15h, AX=e801h).

Without this patch:
[    0.000000] init_memory_mapping: [mem 0x07000000-0x07fdffff]
[    0.000000] RAMDISK: [mem 0x0710a000-0x07fd7fff]

With this patch:
[    0.000000] init_memory_mapping: [mem 0x07000000-0x07fdffff]
[    0.000000] RAMDISK: [mem 0x07112000-0x07fdffff]

So linuxboot is able to use the 64k that were added as padding for
QEMU <= 2.1.

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit cdebec5e

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

If a qcow2 image specifies a backing file format that doesn't correspond
to any format driver that qemu knows, we shouldn't fall back to probing,
but simply error out.

Not looking up the backing file driver in bdrv_open_backing_file(), but
just filling in the "driver" option if it isn't there moves us closer to
the goal of having everything in QDict options and gets us the error
handling of bdrv_open(), which correctly refuses unknown drivers.

Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-4-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit c5f6e493

)

Conflicts:
	tests/qemu-iotests/group

*removed context from upstream iotest groups

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

The qcow2 specification requires that the header extension data be
padded to round up the extension size to the next multiple of 8 bytes.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-3-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 8884dd1b

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
(cherry picked from commit a163ac3f57b5baa117158f7c0488d276ba3377e2)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

After reading the extension header, offset is incremented, but not
checked against end_offset any more. This way an integer overflow could
happen when checking whether the extension end is within the allowed
range, effectively disabling the check.

This patch adds the missing check and a test case for it.

Cc: qemu-stable@nongnu.org
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-2-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 2ebafc85

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

Modify block_save_iterate() to return positive/zero/negative
(success/not done/failure) return status. The computation of
the blocks transferred (an int64_t) exceeds the size of an
int return value.

Signed-off-by: Gary R Hook <gary.hook@nimboxx.com>
Reviewed-by: ChenLiang <chenliang88@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1416958202-15913-1-git-send-email-gary.hook@nimboxx.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit ebd9fbd7

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

The return value must be negative on error; there is one place in
raw_open_common() where errp is set, but ret remains 0. Fix it.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 01212d4e

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

bdrv_truncate() may fail and qcow2_write_compressed() should return the
error code in that case.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 6a69b962)

Conflicts:
	block/qcow2.c

*removed context dependency on 75d3d21f



Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

qcow2_cache_flush() may fail; if one of the caches failed to be flushed
successfully to disk in qcow2_close() the image should not be marked
clean, and we should emit a warning.

This breaks the (qcow2-specific) iotests 026, 071 and 089; change their
output accordingly.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 3b5e14c7

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 9e52c53b

)

*included to maintain parity with unit tests which inject errors
 via blkdebug. needed for:
 "qcow2: Flushing the caches in qcow2_close may fail"

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

In qcow2_alloc_cluster_offset(), *num is limited to
INT_MAX >> BDRV_SECTOR_BITS by all callers. However, since remaining is
of type uint64_t, we might as well cast *num to that type before
performing the shift.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 11c89769

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

Add a test for creating and amending images (amendment uses the creation
options) with formats not supporting creation over protocols not
supporting creation.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 2247798d

)

Conflicts:
	tests/qemu-iotests/group

*removed context dependencies from upstream iotest groups

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

There may be NBD tests which do not create a sample image and simply
test whether wrong usage of the protocol is rejected as expected. In
this case, there will be no NBD server and trying to kill it during
clean-up will fail.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit f798068c

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

The image options which can be amended are described by the .create_opts
field for every driver. This field must therefore be non-NULL so that
anything can be amended in the first place. Check that this holds true
before going into qemu_opts_create() (because if .create_opts is NULL,
the create_opts pointer in img_amend() will be NULL after
qemu_opts_append()).

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit b2439d26

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

If a driver supports image creation, it needs to set the .create_opts
field. We can use that to make sure .create_opts for both drivers
involved is not NULL for the target image in qemu-img convert, which is
important so that the create_opts pointer in img_convert() is not NULL
after the qemu_opts_append() calls and when going into
qemu_opts_create().

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit f75613cf

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

If a driver supports image creation, it needs to set the .create_opts
field. We can use that to make sure .create_opts for both drivers
involved is not NULL in bdrv_img_create(), which is important so that
the create_opts pointer in that function is not NULL after the
qemu_opts_append() calls and when going into qemu_opts_create().

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit c6149724

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

The nfs protocol driver is capable of creating images, but did not
specify any creation options. Fix it.

A way to test this issue is the following:

$ qemu-img create -f nfs nfs://127.0.0.1/foo.qcow2

 64M

Without this patch, it segfaults. With this patch, it does not. However,
this is not something that should really work; qemu-img should check
whether the parameter for the -f option (and -O for convert) is indeed a
format, and error out if it is not. Therefore, I am not making it an
iotest.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit fd752801

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

Although virtually impossible right now, bdrv_find_format("qcow") may
fail. The vvfat block driver should heed that case.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 1bcb15cf

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

We can always assume raw, file and qcow2 being available; so do not use
bdrv_find_format() to locate their BlockDriver objects but statically
reference the respective objects.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit ef810437

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

There are some block drivers which are essential to QEMU and may not be
removed: These are raw, file and qcow2 (as the default non-raw format).
Make their BlockDriver objects public so they can be directly referenced
throughout the block layer without needing to call bdrv_find_format()
and having to deal with an error at runtime, while the real problem
occurred during linking (where raw, file or qcow2 were not linked into
qemu).

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 5f535a94

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

virtio_net_handle_ctrl() and other functions that process control vq
request call iov_discard_front() which will shorten the iov. This will
lead unmapping in virtqueue_push() leaks mapping.

Fixes this by keeping the original iov untouched and using a temp variable
in those functions.

Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1417082643-23907-1-git-send-email-jasowang@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 771b6ed3

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

The other callers to blk_set_enable_write_cache() in this file
already check for s->blk == NULL.

Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1416259239-13281-1-git-send-email-dslutz@verizon.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 6b896ab2)

Conflicts:
	hw/ide/core.c

*removed dependency on 4be74634



Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

The code in invalidate_and_set_dirty() needs to handle addr/length
combinations which cross guest physical page boundaries. This can happen,
for example, when disk I/O reads large blocks into guest RAM which previously
held code that we have cached translations for. Unfortunately we were only
checking the clean/dirty status of the first page in the range, and then
were calling a tb_invalidate function which only handles ranges that don't
cross page boundaries. Fix the function to deal with multipage ranges.

The symptoms of this bug were that guest code would misbehave (eg segfault),
in particular after a guest reboot but potentially any time the guest
reused a page of its physical RAM for new code.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416167061-13203-1-git-send-email-peter.maydell@linaro.org
(cherry picked from commit f874bf90

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

freeaddrinfo(result) does not assign result = NULL, after frees it.
There will be a double free when it goes error case.
It is reported by covertiy.

Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 77374582

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

In function connect_to_qemu(), getaddrinfo() will allocate memory
that is stored into server, it should be freed by using freeaddrinfo()
before connect_to_qemu() return.

Cc: qemu-stable@nongnu.org
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 5bbebf62

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

Old BIOSes left some padding by mistake after the req_size/resp_size.
New QEMU does not like it, thinking it is a bidirectional command.

As a workaround, we can check if the ANY_LAYOUT bit is set; if not, we
always consider the first buffer as the virtio-scsi request/response,
because, back when QEMU did not support ANY_LAYOUT, it expected the
payload to start at the second element of the iovec.

This can show up during migration.

Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 55783a55

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

Memory slots have to be page aligned to get entered into KVM. There
is existing logic that tries to ensure that we pad memory slots that
are not page aligned to the biggest region that would still fit in the
alignment requirements.

Unfortunately, that logic is broken. It tries to calculate the start
offset based on the region size.

Fix up the logic to do the thing it was intended to do and document it
properly in the comment above it.

With this patch applied, I can successfully run an e500 guest with more
than 3GB RAM (at which point RAM starts overlapping subpage memory regions).

Cc: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit f2a64032

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

Entry opcode needs to check if moving to new register frame would cause
register window overflow. Entry used in function prologue never
overflows because preceding windowed call* opcode writes return address
to the target register window frame, causing overflow exceptions at the
point of call. But when a sequence of entry opcodes is used for register
window spilling there may not be a call or other opcode that would cause
window check between entries and they would not raise overflow exception
themselves resulting in data corruption.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
(cherry picked from commit 1b3e71f8

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

A linux guest will be issuing messages:

[   32.124042] DC390: Deadlock in DataIn_0: DMA aborted unfinished: 000000 bytes remain!!
[   32.126348] DC390: DataIn_0: DMA State: 0

and the HBA will fail to work properly.
Reason is the emulation is not setting the 'DMA transfer done'
status correctly.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit c3543fb5

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

The g_hash_table_iter_* functions for iterating through a hash table
are not present in glib 2.12, which is our current minimum requirement.
Rewrite the code to use g_hash_table_foreach() instead.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit f8833a37

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

If there are still pending i/o while deleting snapshot,
because deleting snapshot is done in non-coroutine context, and
the pending i/o read/write (bdrv_co_do_rw) is done in coroutine context,
so it's possible to cause concurrency problem between above two operations.
Add bdrv_drain_all() to bdrv_snapshot_delete() to avoid this problem.

Signed-off-by: Zhang Haoyu <zhanghy@sangfor.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 201410211637596311287@sangfor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 3432a192

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

U-boot for xtensa always treats uImage load address as virtual address.
This is important when booting uImage on xtensa core with MMUv2, because
MMUv2 has fixed non-identity virtual-to-physical mapping after reset.

Always do virtual-to-physical translation of uImage load address and
load uImage at the translated address. This fixes booting uImage kernels
on dc232b and other MMUv2 cores.

Cc: qemu-stable@nongnu.org
Reported-by: Waldemar Brodkorb <mail@waldemar-brodkorb.de>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
(cherry picked from commit 6d2e4530

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

Such address translation is needed when load address recorded in uImage
is a virtual address. When the actual load address is requested, return
untranslated address: user that needs the translated address can always
apply translation function to it and those that need it untranslated
don't need to do the inverse translation.

Add translation function pointer and its parameter to uimage_load
prototype. Update all existing users.

No user-visible functional changes.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit 25bda50a

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

Commit 9d8bf2d1

 moved the softmmu slow path out of line and introduce a
regression at the same time by always calling tcg_out_tlb_load with
is_load=1. This makes impossible to run any significant code under
qemu-system-mips*.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit 0a2923f8

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

If req->resp.cmd.status is not GOOD, the address of sense for
qemu_iovec_from_buf should be modified from &req->resp to sense.

Cc: qemu-stable@nongnu.org
Signed-off-by: Ting Wang <kathy.wangting@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit b7890c40

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

bits_per_pixel that are less than 8 could result in accessing
non-initialized buffers later in the code due to the expectation
that bytes_per_pixel value that is used to initialize these buffers is
never zero.

To fix this check that bits_per_pixel from the client is one of the
values that the rfb protocol specification allows.

This is CVE-2014-7815.

Signed-off-by: Petr Matousek <pmatouse@redhat.com>

[ kraxel: apply codestyle fix ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit e6908bfe

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

qemu_shutdown_requested may be interrupted by qemu_system_killed. If the
latter sets shutdown_requested after qemu_shutdown_requested has read it
but before it was cleared, the shutdown event is lost. Fix this by using
atomic_xchg.

This provides a different fix for the problem which commit 15124e14
attempts to deal with. That commit breaks use of ^C to drop into gdb,
and so this approach is better (and 15124e14

 can be reverted).

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[PMM: commit message tweak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

(cherry picked from commit 817ef04d

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

commit 57f97834

 cleaned up
the cac_applet_pki_process_apdu function to have a single
exit point. Unfortunately, that commit introduced a bug
where the sign buffer can get free'd and nullified while
it's still being used.

This commit corrects the bug by introducing a boolean to
track whether or not the sign buffer should be freed in
the function exit path.

Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Alon Levy <alon@pobox.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 81b49e8f

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

While writing an L1 table sector, qcow2_write_l1_entry() copies the
respective range from s->l1_table to the local "buf" array. The size of
s->l1_table does not have to be a multiple of L1_ENTRIES_PER_SECTOR;
thus, limit the index which is used for copying all entries to the L1
size.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit a1391444

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>

Add verification to vmsvga_fill_rect, re-enable HW_FILL_ACCEL.

Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
(cherry picked from commit bd9ccd85

)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>